基于区域特征和质心关系的两步法阀板检测

针对冲压阀板中毛刺、冲压孔堵塞等缺陷的检测问题,提出了一种基于面积特征的通孔数目检测和基于质心关系的快速模板匹配检测的两步视觉检测方案。首先采用通孔数检测初步判定零件是否存在冲压孔堵塞缺陷,之后采用模板匹配精确检测边缘毛刺缺陷。利用区域面积特征实现通孔数检测;提出了一种限定条件的最小二乘法圆拟合方法和一种基于圆心特征的快速模板匹配方法,实现边缘毛刺等缺陷的精确检测。实验结果表明,这种两步检测方案检测速度快精准度高,能够满足阀板生产线的检测要求。     

Influence of heat treatment on corrosion behaviors of 316L stainless steel in simulated cathodic environment of proton exchange membrane fuel cell (PEMFC)

The influences of two types of heat-treatments on the corrosion behavior of 316L SS in the simulated cathodic environment of PEMFC, are investigated using potentiodynamic curve, electrochemical impedance spectroscopy (EIS), Mott-Schottky plot and auger electron spectroscopy (AES), respectively. The results show that 316L SS is in the passive state within the potential region from −0.1V_SCE to 0.8V_SCE in the simulated cathodic environment of PEMFC, and a passive film can be formed on 316L SS. The passivity of 316L SS in the simulated cathodic environment of PEMFC firstly increases and then degrades with the increased solid solution temperature or time, and the best passivity corresponds to the solid solution temperature at 1050 °C for 40 min among other solid solution treatments. While 316L SS heat-treated with the solid solution treatment at 1050 °C for 40 min plus aging treatment at 900 °C for 4 h, also has the best passivity in the same solution among other solid solution plus aging treatments. The best corrosion protection, lowest donor density and the highest thickness of the passive film corresponding to the solid solution temperature at 1050 °C for 40 min among other solid solution or solid solution plus aging heat treatments, and this treatment is mostly suitable for improving the anti-corrosion property of 316L SS in the simulated cathodic environment of proton exchange membrane fuel cell (PEMFC).     

Environmental Engel curves in Italy: A spatial econometric investigation

This paper adopts a spatial econometric methodology to investigate the relationship between income and direct household emissions in Italy, as posited by the environmental Engel curve. The spatial approach is motivated by an expanding strand of studies that have detected significant spatial interactions in household-polluting activities responsible for the generation of direct household emissions. Our results suggest the presence of significant spatial dependence for household emissions emerging among regions. At the same time, increases in the level of income do not seem to be coupled with a higher demand for environmental quality by Italian households.     

Effects of cold plasma on the color parameters of Hyssop (Hyssopus officinalis L.) using color imaging instrumentation and spectrophotometer

This research was conducted to evaluate the effects of cold atmospheric plasma treatment on the color of Hyssop (Hyssopus officinalis L.) and also to compare the usage of the spectrophotometer vs the color imaging instrumentation for the evaluation of the treatment on the color parameters. The experiments were investigated at different treatment times of 1, 5, and 10 minutes and the voltage values of 17, 20, and 23 kV. Possible changes of color were evaluated by using CIE L*a*b* values obtained with HunterLab colorimeter and CIE L*a*b* values obtained with a digital still camera (DSC) using digital image processing (MATLAB software). The values of L*, a*, and b* of the samples were obtained using both the methods. The results revealed that the L*, a*, and b* values of the treated Hyssop samples changed with increasing the treatment time and the voltage applied. Evaluating the interaction effects revealed that there was a significant difference in the (−a^*/b^* ) ratio. In addition, the results showed that the effects of all variables on the color parameters were significantly different in the case of the DSC using digital image processing. However, these effects were not significantly different using HunterLab colorimeter except for time variable and interaction effects of a* and (−a^*/b^* ) ratio. The lightest green color and the maximum chlorophyll content loss were observed for 23 kV applied over 10 minutes. Based on the results, the digital image processing can be used as a practical tool to study the variations at the color of dried Hyssop leaves after cold plasma treatment.     

NiCrAlFe精密电阻合金中的L12有序结构研究

有序结构的形成是决定NiCrAlFe精密电阻合金电学性能的关键因素。本文利用第一性原理赝势平面波方法，计算了合金处于无序固溶体结构和形成L12型有序结构时的结合能、态密度、晶格常数等参数，并利用高分辨透射电子显微镜（HRTEM）对合金进行了结构表征，还测试了固溶态和时效态的电阻率。从结合能来看，该合金形成L12有序结构时比无序固溶体更加稳定；态密度以及部分态密度计算结果则表明，在L12有序结构中，Ni、Cr、Al、Fe会强烈成键而使得整个合金体系变得稳定；HRTEM分析结果证明固溶态合金经过和时效处理后出现了L12有序结构，而且该有序结构的晶格常数与计算值基本一致。对比无序固溶体与L12型有序结构费米能级处的态密度值发现，当形成L12有序结构时合金的导电能力较无序固溶体下降，电阻率升高，与实际测试结果吻合。     

Peanut FAD2 Genotype and Growing Location Interactions Significantly Affect the Level of Oleic Acid in Seeds

The level of oleic acid is an important parameter in determining seed nutritional quality and oil stability. The level of oleic acid in peanut is genetically controlled by a pair of fatty acid desaturase genes (FAD2A and FAD2B), but the environmental conditions of the production sites can also have a significant effect. To investigate the effect of gene and environment interaction, 45 accessions were grown at three locations for 2 years. Environmental data were collected; individual plants were genotyped with functional SNP markers from FAD2A and FAD2B; and seed level of oleic acid was determined by gas chromatography. Three FAD2A/FAD2B genotypes (448G/no insertion 442A, 448A/no insertion 442A, and 448A/insertion 442A) were identified and designated as G/W, A/W, and A/A, respectively. A/A genotype averaged the highest level of oleic acid (80.0%), followed by A/W (56.0%), and then G/W (40.7%). Analysis of gene and environment interaction revealed that oleic acid phenotype plasticity could be explained by the interaction of FAD2 genotype and photothermal time, which quantified environmental conditions. The A/W genotype was the most sensitive to photothermal time changes. The oleic acid plasticity revealed in this study would be useful for breeders, farmers, and product processors.     

Steam radish sprout (Raphanus sativus L.): active substances,antioxidant activities and non-targeted metabolomics analysis

Various active substances, antioxidant activities and primary differential metabolite profiles were investigated to assess the nutritional quality of radish sprouts steamed for 0–300 s. The levels of flavonoids, total phenolic content and isothiocyanate in radish sprouts decreased with increased steaming time, and DPPH radical scavenging activity levels and superoxide dismutase levels also exhibited a downward trend (P < 0.05). By contrast, total phenolic acid, ferric-reducing antioxidant power and reducing power levels exhibited significant increases in the early short-term steaming process (P < 0.05). Steaming for 30 s promoted the accumulation of vitamin B₂, whereas, steaming for 300 s promoted the accumulation of phospholipids and myristic acid to a greater extent than steaming for 30 s. Overall, there was a partial non-decreased nutritional indicator in short-term steaming of radish sprouts, and a longer steaming time positively affected the differential metabolites.     

华南植物园藤本植物专类园规划设计

专类园是一种强调专类植物收集、展示和植物造 景的园林形式，在植物园建设中具有重要地位。藤本植物因 其独特的观赏特征、生长习性及生态效应，近年已成为城市 园林绿化的重要造景材料。在分析华南植物园藤本植物专类 园建设背景、园址概况的基础上，结合其功能定位，提出了 科学性、功能性、地域性、艺术性及以人为本的规划原则； 确定了“一轴、三线、三点、五片区”的总体规划布局。在 文化线的园林构图及造景上，重点阐述了三大主题景观节 点——帷幄疏影、西关居、文昌亭的设计理念及其园林建筑 风格，探讨了岭南传统建筑、小品及文化在构建地域特色园 林景观中的作用；在植物线的园林造景上，简介了各景区的 植物布置方式及组景模式；在科普旅游线的组织上，介绍了 园区的园林小品造景意境及科普设施布置形式，以期为中国 藤本植物专类园建设提供参考。     

Electron Paramagnetic Resonance and Magnetic Circular Dichroism Spectra of the Nitrogenase M Cluster Precursor Suggest Sulfur Migration upon Oxidation: A Proposal for Substrate and Inhibitor Binding

The active site of the nitrogen-fixing enzyme Mo-nitrogenase is the M cluster ([MoFe₇S₉C ⋅ R-homocitrate]), also known as the FeMo cofactor or FeMoco. The biosynthesis of this highly complex metallocluster involves a series of proteins. Among them, NifB, a radical-SAM enzyme, is instrumental in the assembly of the L cluster ([Fe₈S₉C]), a precursor and all-iron core of the M cluster. In the absence of sulfite, NifB assembles a precursor form of the L cluster called the L* cluster ([Fe₈S₈C]), which lacks the final ninth sulfur. EPR and MCD spectroscopies are used to probe the electronic structures of the paramagnetic, oxidized forms of both the L and L* clusters, labeled L^Ox and [ L* ] ^Ox . This study shows that both L^Ox and [ L* ] ^Ox have nearly identical EPR and MCD spectra, thus suggesting that the two clusters have identical structures upon oxidation; in other words, a sulfur migrates away from L^Ox following oxidation, thereby rendering the cluster identical to [ L* ] ^Ox . It is proposed that a similar migration could occur to the M cluster upon oxidation, and that this is an instrumental part of both M cluster formation and nitrogenase substrate/inhibitor binding.     

Elevated temperature impact on performance of Low Temperature Co-fired Ceramic dielectrics

The need for electronics to operate at temperatures of 200°C and above continues to grow. These applications include avionics, aerospace, automotive, downhole drilling, mining, and many others. To satisfy this demand, a significant amount of research and development has been conducted. Despite the efforts, the number of new electronic components designed specifically for high-temperature operation is still relatively limited. In Low Temperature Co-fired Ceramic (LTCC) packages, LTCC materials are generally used as the host media for a number of pre-fabricated semiconductor components. As a result, reliability of the entire LTCC package largely depends on the performance of the least robust component. Ferro A6M-E and Ferro L8 are the two well-established and recognized LTCC dielectrics widely used for mid and high frequency LTCC applications, including several high reliability aerospace and defense applications that require demanding Mil-Spec qualifications. This study is our first attempt to characterize and understand basic high-temperature dielectric properties of these two commercial LTCC materials. The secondary objective is to initiate a dialogue in attempt to establish reliability requirements for LTCC packages dedicated for high-temperature operation.